Rust preventive oils are used for intermediate storage of dry work pieces during and after production. Besides a rapid application speed and a reliable corrosion protection they offer further advantages: · barium-free · VOC-free* · easily removed with our FEROCLEAN product series
RUST PREVENTIVES
RUST PREVENTIVES OIL
Rust preventive oils are used for intermediate storage of dry work pieces during and after production. Besides a rapid application speed and a reliable corrosion protection they offer further advantages: · barium-free · VOC-free* · easily removed with our FEROCLEAN product series
ISOTECT OM 606
is a low viscosity rust preventive oil for intermediate conservation in a medium corrosion potential environment.
ISOTECT OM 614
is a medium viscosity rust preventive oil for intermediate conservation in higher corrosion potential environment.
ISOTECT OM 625
is a medium viscosity rust preventive oil for intermediate conservation in medium corrosion potential environment.
Solvent-based rust preventives
Solvent-based rust preventives form thin rust preventive films with the consistency depending on the inhibitor type. Due to the evaporating solvent the film normally appears much drier than with rust preventive oils. The evaporation speed correlates with the solvent flash point. Further advantages are: · reliable rust prevention · fast drying · easily removed with our FEROCLEAN product series:
ISOTECT OS 306
is a solvent-based rust preventive, which leaves a thin oily film on the work piece.
ISOTECT 377
leaves a vaseline-like rust preventive film that offers a long lasting transport protection.
Dewatering Fluide
Dewatering Fluids offer a reliable rust prevention that is built following the evaporation of the solvent. Protection films are available in both an oily and a slightly waxy type. The different solvent carrier flash points offer the possibility to select the Dewatering Fluid to suit the working environment. Dewatering Fluids can be successfully used on emulsion wetted components and work pieces.
ISOTECT OSD 213
is a fast evaporating Dewatering Fluid that leaves an oily film.
ISOTECT WSD 310
is a medium evaporating speed Dewatering Fluid that leaves a slightly waxy film.
ISOTECT WSD 212
is a fast evaporating Dewatering Fluid that leaves a slightly waxy film.
ISOTECT OSD 311
is a medium evaporating speed Dewatering Fluid that leaves an oily film.
ISOTECT WSD 408
is a VOC-free* Dewatering Fluid conforming to 1999/13/EC that leaves a slightly waxy film.
ISOTECT OSD 409
is a VOC-free* Dewatering Fluid conforming to 1999/13/EC that leaves an oily film.
Importantly PETROFER Dewatering Fluids are
- barium-free
- fast drying
- available without VOC* (1999/13/EC)
- easily removed with our FEROCLEAN product series
Water-dilutable concentrates
Due to their water content, water-dilutable rust preventive concentrates offer advantages compared to mineral oil and solvent based rust preventives in the field of operational safety, especially fire protection
ISOTECT OW 600
is used to keep the decorative gloss on cast parts made of aluminium or zinc when quenching from casting temperature.
ISOTECT OW 603
is a water-miscible, mineral oil based concentrate, which can be used from room temperature to 80°C, and leaves an oily protection layer.
ISOTECT WW 604
is a water-miscible, synthetic concentrate. It is used at higher temperatures and leaves a thin waxy film.
Due to the solubility with water it is important to fully dry the work pieces following application, within an appropriate period of time. This can be achieved by hot application and therefore the drying by residual heat of the work piece or by forced hot air. As town water salts are potentially corrosive, we recommend the use of DI-water or water with low water hardness. Other advantages are: · economical · adjustable concentration depending on the process requirements · free from heavy metals
Water soluble additives
Water soluble rust preventive additives are added to cleaning baths or coolant emulsions to achieve an improved corrosion protection. Some products may be used as stand-alone processes, e.g. in cooling water systems.
AQUAPLUS KSO
is a nitrite and mineral oil free concentrate. It is used when the physical properties of water should not be changed significantly. Typical applications are cooling systems, inductive hardening, flame hardening or pressure leak testing.
ISOADD C 200
is mainly used in cleaning baths. It is primarily used in the rinsing baths to provide a good temporary corrosion protection.
ISOADD AC 001
is an additive for water-miscible coolant systems for the simultaneous improvement of alkalinity and rust preventive properties. It is free from secondary amines and nitrite agents.
The rust preventing properties mainly work in fluid application systems, and not for storage. The remaining film is very thin and easily removed by water. We are glad to help you to find the right additive for your application
AQUAPLUS 22
is a nitrite and mineral oil free concentrate. It is used when the physical properties of water should not be changed significantly. Typical applications are cooling systems, inductive hardening, flame hardening or pressure leak testing.